3 Chemicals You Need To Open Your Pool

Pool season is almost here and as every pool owner knows, it’s better to be prepared than not. Most people will want to automatically start adding in adjustment chemicals, but this is a mistake.

The best and easiest way to open your pool is to start with a clean and fresh base. Here are the chemicals we recommend using before you open your pool.

Stain and Scale Chemicals

This chemical will prevent scale, rust, and other stains from appearing in your pool. This is a great prep to make sure your pool is clean right from the start.

Algaecide

Algaecide will help remove most of the oxygen from the water, to prevent any algae or other organic material from growing. The mixture should also kill any algae that are already currently in your pool from the winter season.

Chlorine

Last, but not least, you need to add chlorine. To open your pool, you’ll want to add double the amount of chemicals that you would do for a regular shock.

Doubling them will help kill any bacteria, algae, and anything else that was growing over the winter.

Next Steps

Your pool isn’t swim-ready yet, especially after you had just added all of these chemicals.

Give your pool at least 48hrs before you test the water again. Bring your sample to the pool experts, and we can help you decide what you need for your pool.

Contact us here or visit us at our Evendale location.

Recommended Posts