3 Chemicals You Need To Open Your Pool

chemicals

3 Chemicals You Need To Open Your Pool

Pool season is almost here and as every pool owner knows, it’s better to be prepared than not. Most people will want to automatically start adding in adjustment chemicals, but this is a mistake.

The best and easiest way to open your pool is to start with a clean and fresh base. Here are the chemicals we recommend using before you open your pool.

Stain and Scale Chemicals

This chemical will prevent scale, rust, and other stains from appearing in your pool. This is a great prep to make sure your pool is clean right from the start.

Algaecide

Algaecide will help remove most of the oxygen from the water, to prevent any algae or other organic material from growing. The mixture should also kill any algae that are already currently in your pool from the winter season.

Chlorine

Last, but not least, you need to add chlorine. To open your pool, you’ll want to add double the amount of chemicals that you would do for a regular shock.

Doubling them will help kill any bacteria, algae, and anything else that was growing over the winter.

Next Steps

Your pool isn’t swim-ready yet, especially after you had just added all of these chemicals.

Give your pool at least 48hrs before you test the water again. Bring your sample to the pool experts, and we can help you decide what you need for your pool.

Contact us here or visit us at our Evendale location.

How To Open Your Pool

open your pool

How To Open Your Pool

We know there’s still time before pool season starts. But there’s no harm in being extra prepared when spring rolls around. There’s, unfortunately, some necessary tasks and work that needs to be completed before you can open your pool for the season. If only there were some ways to make this daunting task seem easier. Luckily, we are here to help you with two time-saving tips on how to open your pool.

Clean The Deck First

Always sweep and clean your decking before you begin to clean your pool. Nothing will frustrate you more easily than watching leaves from your deck blow into your freshly skimmed and vacuumed pool.

Use Your Pump

If you’ve had a cover on the pool for the winter, chances are some water has pooled upon it. You can utilize your sump pump to drain the water off before you try to move it. This will help to eliminate excess debris from falling into your pool and also make the cover much easier to move and open your pool. (You can also create a siphon effect with your garden hose to remove water from the top.)

Need help opening your pool this year? Contact us here!